LED Tube Light

tube

T8 LED TUBE LIGHT

Specifications:

Direct replacement for T8, T10, & T12 fluorescent**
Operates on line voltage (specify 120 or 277)
No ballast = lower maintenance costs over lamp life**
Wide 120 degree beam
Standard T8 / T12 2-pin base enables easy retrofit**
Aluminum heat sink backing ensures maximum LED life
Instant on to full light output even in cold environments
For indoor use or within weatherproof enclosures

Not dimmable
Lumen output 24” = 750
Lumen output 48” = 1500
Lumen output 60” = 1800
High CRI white LEDs
No glass and No mercury
35,000 hours + lamp life
3 year limited warranty

Ordering Information

SERIES	LENGTH	LIGHT	VOLTS	WATTS	BASE	FINISH	OPTIONS
TL	24	30=3000K	120	10=24" only	G13	NA
	48	45=4500K	277	18=48"only
	60	65=6500K		22=60"only

* 24" = 10 WATTS / 48" = 18 WATTS / 60" = 22 WATTS

***Other options are available. Contact Hudnut LED Lighting Solutions for additional information.

ALWAYS REMOVE BALLAST PRIOR TO INSTALLING LED T8 TUBE LIGHT
CONSULT INSTALLATION INSTRUCTIONS FOR WIREING GUIDE

LED T8

» Top of page